Ericsson R380s - Turning on and off

12 Getting Started
To remove the SIM card:
Warning! Always disconnect the charger and other accessories from
your phone before inserting and removing your SIM card.
1.
Ensure that the R380s is turned off and the flip is closed.
2.
Remove the battery.
3.
Slide the SIM card out of the SIM card holder.
The button on your keypad turns your R380s on or off.
Tip! The term press and hold is equivalent to a key press time of
approximately 2 seconds.
To turn your R380s on:
1.
Ensure that you have inserted your SIM card into your R380s, the
battery is charged and that the flip is closed.
2.
Press and hold until you hear a tone and the display turns
on.
To turn your R380s off:
•
In standby mode, press and hold until you hear a tone.
Entering a Personal Identification Number (PIN)
Some SIM cards are protected with a PIN code.
If
Enter PIN:
appears in the display after you have turned on the
R380s:
1.
Enter your PIN code. If you make a mistake while entering your
PIN, erase the incorrect entry by pressing clear. The code
you enter appears as asterisks (*) in the display, unless 1 or 9 is
entered as the first digit, i.e. calling an emergency number.
2.
Press .
On finding a network, the name given by your network operator or
a supporting associate operator network appears in the display.
Note: If your PIN is entered incorrectly three times in a row, the SIM
card is blocked. You can unblock it by using your PIN Unblocking
code (PUK). See “Security” on page 21 for more information.
Note: If
Enter code
appears in the ‘Phone locked’ message display,
enter your phone lock code. See “Security” on page 21 for more
information.
Turning on and off
SIM card locked
****
Enter PIN: