R380 Communications Suite 187
If you have lost data or accidentally deleted information in your
R380s you can restore an earlier backup.
To restore a backup:
1.
Connect the serial cable to your R380s and computer.
2.
Click Start|Programs|Ericsson|R380 Communications Suite
and choose Restore.
3.
Select one of the backups in the list of previously saved backups
and click Start Restore.
4.
Click Yes to confirm that you want to continue.
Warning! Everything
in your R380s will be overwritten by the
chosen backup. Once you have clicked Yes to start the restore, you
cannot cancel the procedure.
5.
When the restore has successfully been completed, click OK to
exit the dialog box.
Note: See the online help for more information on how to restore
backups.
English is always available from your R380s.
To change the language:
1.
Connect the serial cable to your R380s and computer.
2.
Insert the Ericsson CD and it starts automatically.
3.
Select the language to use for the CD and click OK.
4.
Click Change Language in R380 under the Communications
heading.
5.
In the dialog box which appears, select the language you want to
change to in the drop-down list box and click OK to proceed.
6.
Click Yes to confirm that you want to change to the chosen
language.
7.
When the change of language has been successfully completed
you must disconnect your R380s, turn it off and turn it on again.
Note: When changing language the settings for keyboard layout, time
format, date format, decimal symbol and sorting order is changed
into the default settings for that country. You can always switch
between two different languages in your R380s, i.e. English and the
language you choose in the Change language in R380 program.
Restoring your R380s
Changing the language in your R380s
To Next Page
Loading...
