180 R380 Communications Suite
R380 Communications
Suite
The R380 Communications Suite allows you to synchronize the data
of your R380s and your computer. You can also make backups and
restore to your R380s.
This chapter tells you how to:
•
Connect your R380s to your computer.
•
Synchronize the data between your R380s and your computer.
•
Store backups from your R380s on your computer.
•
Restore backups from your computer to your R380s.
•
Find help on a particular subject.
Note: R380 Communications Suite’s online help also explains how to
use all program features.
Warning! When synchronizing e-mails, make sure attached files are
not infected with a virus. It is recommended that you run a check with
an anti-virus program on your computer immediately after
synchronizing.
Connecting your R380s to your computer allows you to manage
information that you want to keep up-to-date on both your computer
and R380s, such as calendar appointments, contact information, e-
mail messages or notepad entries. Also, it allows you to backup the
contents of your R380s to the computer and to restore the information
if you encounter problems with your R380s.
Before you can connect your R380s to a computer, you need to:
1.
Make sure your computer meets the requirements described
below.
2.
Install the R380 Communications Suite on your computer.
3.
Connect to your computer via the serial cable.
Note: The term ‘computer’ is equivalent to PC.
Connecting your R380s to your computer
To Next Page
Loading...
