Ericsson R380s - Manually Set up E-Mail; Sending an E-Mail for the First Time

138 Getting started with e-mail and WAP
To manually set up e-mail:
1.
With the flip open, tap
Extras
,
System
,
Preferences
and
Messaging
.
From the messaging display select
e-mail accounts
(you need to
scroll down to find it).
2.
Tap the and select
new e-mail account
.
3.
Use the information given in the previous table (page 134) to
complete the form. You will have to use the scroll bar to see all the
items.
An additional field you need to fill in is:
4.
If you need any help contact your service provider or Ericsson
Mobile Internet at http://mobileinternet.ericsson.com
.
5.
Once all the details are entered tap .
You have successfully set up your e-mail account, the next step is to
send an e-mail to check it is working.
Creating and sending a new e-mail message
1.
Tap Messaging and select
New e-mail
on the Messaging desktop.
The New e-mail message screen appears on the display.
Manually set up e-mail
Name A name which identifies the e-mail account, you
can enter anything, e.g. fred’s mail
Note: The R380s only allows the setting to saved
if a unique name has been entered.
Confirm
Password
A check to make sure that you have entered the
password correctly
Sending an e-mail for the first time
New e-mail account
Name:
E-mail address:
Protocol:
Username:
Password:
Confirm password:
<myserviceprovider>
<fred@myserviceprovider.com>
<fred>
<**********>
<**********>
<POP3>
OK