Ericsson R380s - Page 172

172 Extras
To change the appearance settings:
1.
Select
Appearance
from the list displayed in the WAP services
settings view. The WAP - Appearance settings view appears in the
display.
2.
To change whether or not images are loaded, select
Load images:
and then select
Yes
or
No
.
3.
To change whether or not hyperlinks are contained within a frame,
select
Frame image links:
and then select
Yes
or
No
.
4.
To change whether or not the sequence of titles is shown in the
title bar, select
Show title sequence:
and then select
Yes
or
No
.
5.
Tap to implement and save the new settings. The display
returns to the WAP services settings view.
To change the cache settings:
1.
Select
Cache
from the list displayed in the WAP services settings
view. The WAP - Cache settings view appears in the display.
2.
To change the size of the cache memory that is reserved for
storing previously visited pages, select
Cache size (KB):
and select
the required size.
3.
Tap to implement and save the new settings. The display
returns to the WAP services settings view.
To create a new WAP profile:
1.
Select
WAP profiles
from the list displayed in the WAP services
settings view. The WAP profiles view appears in the display.
2.
Tap and select
New WAP Profile
. The New WAP profile view
appears in the display.
3.
Enter the required information.
•
Name:
Enter a name for this profile.
•
Service provider:
Tap the service provider field and select which
service provider to use for this profile. If you would like to
select a service provider whenever you use this profile, choose
[Always ask]
•
Gateway:
Enter the IP address for the WAP gateway.
•
Gateway username:
Enter the your username for the gateway.
•
Gateway password:
Enter your password.
•
Confirm password:
Re-enter your password for confirmation.
•
Security:
Select whether or not you want the Security on. If
On
is selected, all data sent to and from the gateway will be
encrypted. Default is
Off
.
OK
OK