Ericsson R380s - Page 68

68 Phone
3.
To turn the increasing ring volume feature on or off, select
Increasing ring
and select
On
or
Off
. When On, the ring volume
increases after two ring sequences at each level, starting at the
lowest level (
1
) and going up to the maximum level (
6
).
4.
To turn the vibrating alert on or off, select
Vibrating alert
and select
On
,
On when silent
or
Off
.
If
On when silent
is selected and the Ring volume is set to
Off
or the
R380s is in Silent mode, then the R380s will vibrate on all
incoming calls or messages.
5.
To turn silent mode on or off, select
Silent mode
and select
On
or
Off
.
6.
Tap to implement and save the new settings. The display
returns to the current expanded directory in the Telephony –
Settings view.
To change the ring signals:
1.
Tap
Ring signals
in the directory. The Ring signals view appears in
the display.
2.
To change the type of ring for speech calls, select
Voice calls
and
select a ring signal.
3.
To change the type of ring for data calls, select
Data calls
and select
a ring signal.
4.
Tap to implement and save the new settings. The display
returns to the current expanded directory in the Telephony –
Settings view.
To turn the minute minder on or off:
1.
Tap
Minute minder
in the directory. The Minute minder view
appears in the display.
2.
Tap the
Minute minder
and select
On
or
Off
.
If you select
On
, you will hear a beep once every minute during a
call as a reminder of the duration of the ongoing call.
3.
Tap to implement and save the new settings. The display
returns to the current expanded directory in the Telephony –
Settings view.
OK
OK
OK