erlab Captair Bio 321 Smart - General Information and Safety; Product Registration and Warranty

3
General
By choosing Captair Smart ductless ltering PCR workstations, you have chosen an efcient and responsible way to
ensure safety.
Erlab’s 50 years of expertise in the ltration systems for laboratories ensure the highest protection for handlings
requiring an ultra clean air environment, such as PCR
. The new Captair Bio Smart range uses an innovative and
straightforward mode of communication called Smart technology. This powerful interface uses light to intuitively and
effortlessly communicate with users and leave them free to focus all their attention on the main task:
their applica-
tion.
Captair Smart Ductless ltering PCR workstations are intended for the protection of biological samples against environmental
pollution and cross-contamination. Thanks to a high efciency ltration system, these devices provide a particle-free working
environment and are also equipped with UV lamp (s) to guarantee the decontamination of the work surface between manipu-
lations.
The system’s connectivity allows for real-time safety alerts and individual device usage reports to be sent via the e-Guard
App.
Safety notices
The effectiveness of your device is directly dependent upon it being used correctly and monitored by its users. Your
laboratory may also benet from ergonomic, economic and ecological advantages provided by the Captair Bio Smart
throughout its life cycle.
• The equipment provided is not intended to be used in an explosive atmosphere.
• The lters delivered with this device must be removed from their packaging and positioned correctly.
• Erlab recommends that the electronic anemometer is calibrated at least once a year.
New lters must be stored in their packaging, kept in a dry location (see recommendations for storing and using the lters).
Product registration
Take full advantage of the device’s connectivity to enhance your safety
Get up to 10 years warranty on your connected Erlab unit
Register your product online: the registration of the product will automatically give you one extra year of warranty (in addition
to the warranty mentioned in the Erlab’ general terms and conditions of sale).
Connect your unit: Once the device is connected to the Internet and congured to exchange usage data, the warranty is
extended for up to 10 years. Warranty will be successively renewed at each lters replacement and for the life time indicated
on the Valipass® and/or or at the end of lter usage time.
In order to benet from Erlab extension of warranty offer, the following conditions shall be respected:
Warranty applicability is subject to the respect of the Erlab’ general terms and conditions of sale and following requirements:
• The registration and/or the connection of the product shall be performed within the twelve months from the purchase date ;
• Filters replacement must be performed following Valiquest® service recommendations or at the end of lter usage time;
The lter’s serial number, used as an identication key, validates this condition, regardless of your device’s supplier (and/
or the replacement lter’s supplier for the following years);
• The device’s replacement lters must be manufactured by Erlab, as must all other spare parts.
Consumables such as lters and saturation sensors are not covered under warranty.