Captair Bio Smart
Mobile ductless ltering PCR workstations
8
Options to connect
Embedded service
RJ45
Mobile or computer app
Flash the QR code to
access usage datas of
the device.
internet
network
and/or
Accessing the Administrator interface
To monitor the parameters and modify the settings of the unit
In order to connect:
• Use a computer equipped with an Ethernet port (to plug the RJ45 cable)
• WIFI of the computer must be switched off
• Web browser (Internet Explorer, Edge, Chrome, Mozilla Firefox, Safari, …) must be installed on the computer
Note: RJ45 cable used to plug the unit to the computer is provided.
1
Direct connection on computer.
• Check that main switch of the device is ON
• Take RJ45 cable (black) already connected to the
unit and placed behind the control panel
To Next Page
Loading...
