Eryone Thinker S - Getting Started: Assembly and First Steps; Printer Assembly Instructions; Initial Operational Tests

3. Printer Assembly
For the Eryone Thinker S 3d printer, we suggest you following the
“Eryone Thinker S Quick Starter Guide “
After a successful completion, continue to the next step.
4. First steps
4.1Test before print
About the LCD layout, you can refer chapter 6.
-Movement test
Click LCD button :
LCD→Prepare→Auto home
Then the 3d printer all axis will home all axis by hitting the limit switch.
-Preheat hotend and heated bed
Click LCD button:
LCD→Prepare→Preheat PLA→Preheat PLA
Then the 3d printer hotend and heated bed will heat to the correct
temperature.
7