ESAB A-12786 - Parts Lists; Introduction; Ordering Information; Power Supply Replacement

ESAB CUTMASTER 120
Manual 0-5389 PARTS LIST
6-1
SECTION 6:
PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
6.03 PowerSupplyReplacement
6.04 ReplacementPowerSupplyParts
6.05 OptionsandAccessories
6.06 ReplacementPartsforHandTorch
6.07 ReplacementParts-forMachineTorcheswithUnshieldedLeads
6.08 ReplacementShieldedMachineTorchLeadsAssemblies
6.09 TorchConsumableParts(SL100)
NOTE!
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper authoriza-
tion will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed in
the parts list for each type item. Also include the model and serial number of the power supply. Address all
inquiries to your authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable,
gas pressure regulator / filter, and operating manual.
Qty Description Catalog #
1 ESAB CutMaster
®
120 Power Supply, Non- CE Non-CCC version
with 400VAC 3 Phase input power cable 0559319303