Need help?Do you have a question about the ESAB PT-36 and is the answer not in the manual?
Overview of the PT-36 Mechanized Plasmarc Cutting Torch and its factory-assembled nature.
Defines the manual's purpose to guide installation, service, and troubleshooting of the PT-36 torch.
Lists various PT-36 torch assembly lengths available for purchase.
Details optional accessories and consumable kits for the PT-36 torch, including part numbers and descriptions.
Provides detailed technical data including gas specifications and operational parameters for the PT-36 torch.
Instructions for connecting the PT-36 torch to the plasma system, including the arc starter box.
Details on connecting the gas hoses to the PT-36 torch.
Instructions for securely mounting the PT-36 torch onto the cutting machine chassis.
Steps for preparing the PT-36 torch, including specific procedures for mirror cutting.
Guide to achieving optimal cut quality by adjusting variables and understanding common issues like angle, flatness, dross, and accuracy.
Diagrams illustrating the internal paths for plasma gas, shield gas, and coolant within the torch.
Overview of torch part wear and the importance of regular inspection for maintaining cut quality.
Step-by-step instructions for disassembling the front end of the PT-36 torch.
Specific instructions for disassembling the torch front end for production thick plate cutting.
Procedure for reassembling the PT-36 torch front end after maintenance or replacement.
Specific instructions for reassembling the torch front end for production thick plate cutting.
Inspection and maintenance procedures for the PT-36 torch body, including O-rings and contact points.
Detailed steps for removing and replacing the entire torch body assembly.
Identifies common operational issues that can lead to reduced electrode and consumable life.
Flowchart guide to diagnose and resolve issues preventing the torch from starting.
To Next Page
General
