ESAB Aristo Robust Feed U6 - Internal Control Panel; Function Explanations

6 CONTROL PANEL
0446 253 101
- 30 -
© ESAB AB 2020
6.1.2 Internal control panel
1. Switch for gas purge or wire inching 3. Knob for setting the gas flow rate (only for
product variants containing a gas flow
meter)
2. Switch for remote or local (only for
PushPull variants)
6.1.3 Function explanations
Gas purging
Gas purging is used when measuring the gas flow or to flush any air or moisture
from the gas hoses before welding starts. Gas purging occurs for as long as the
button is held depressed and occurs without voltage or wire feed starting.
Wire inching
Wire inching is used when one needs to feed wire without welding voltage being
applied. The wire is fed as long as the button is depressed.
Remote
The remote function enables the remote control for PushPull torch or Miggytrac/Railtrac
options and disables the external control panel on the wire feeder.
Local
The local function enables the external control panel in the wire feeder and disables the
remote control for PushPull torch or Miggytrac/Railtrac options.