ESAB Aristo Robust Feed U6 - Page 41

ORDERING NUMBERS
0446 253 101
- 41 -
© ESAB AB 2020
Ordering no. Denomination Note
0445 800 892 Robust Feed Pulse, Offshore, Water,
ELP, Push Pull, Mechanized MIG
With EURO connector, torch
cooling system, ELP, heater, gas
flow meter and MMA
0445 800 889 RobustFeedU6, Offshore With Tweco 4 connector, heater,
gas flow meter and MMA
0445 800 890 RobustFeedU6, Offshore, PushPull,
Mechanized MIG
With Tweco 4 connector, heater,
gas flow meter and MMA
0445 800 893 RobustFeedPulse, Offshore, PushPull With Tweco 4 connector, heater,
gas flow meter and MMA
0463 708 001 Spare parts list RobustFeedU6,
RobustFeedPulse
0463 707 001 Service manual RobustFeedU6,
RobustFeedPulse
0459 287 * Instruction manual Aristo® U6
0463 459 * Instruction manual MA25Pulse
The three last digits in the document number of the manual show the version of the manual.
Therefore they are replaced with * here. Make sure to use a manual with a serial number or
software version that corresponds with the product, see the front page of the manual.
Technical documentation is available on the Internet at: www.esab.com