6 MAINTENANCE
0463 609 101
- 15 -
© ESAB AB 2020
6 MAINTENANCE
Regular maintenance is important for safe, reliable operation.
Maintenance may only be carried out by an authorised technician. Only personnel with the
appropriate electrical skills (authorised staff) may remove safety plates.
CAUTION!
All warranty undertakings from the supplier cease to apply if the customer attempts
any work to rectify any faults in the product during the warranty period.
6.1 Inspection and cleaning
Check regularly that the control unit is not clogged with dirt.
How often and which cleaning methods apply depend on:
• welding process
• arc time
• location of the unit
• surrounding environment
Usually it will be sufficient to blow the unit clean once a year, using dry compressed air
(reduced pressure).
To Next Page
Loading...
