EasyManuals Logo

ESAB Feed L302 Origo M08 User Manual

ESAB Feed L302 Origo M08
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
-8-
bm38d1ea
WARNING
Assure that the side panels are closed during operation.
WARNING
To prevent the reel from sliding off the hub: Lock the
reel in place by turning the red knob as shown on the
warning label attached next to the hub.
WARNING
Rotating parts can cause injury, take great care.
WARNING
There is a risk of tipping if the wire feed unit is fitted with a counterbalance arm.
Secure the equipment, especially if used on an uneven or sloping surface.
NOTE: When moving the equipment use intended handle. Never pull on the gun.
6.1 Connections and control devices
Connecting control cable
When connecting the control cable, it is
important to secure the cable with the
load-removing grommet.
Ensure that the cover is properly screwed
into place.
GB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ESAB Feed L302 Origo M08 and is the answer not in the manual?

ESAB Feed L302 Origo M08 Specifications

General IconGeneral
BrandESAB
ModelFeed L302 Origo M08
CategoryWelding System
LanguageEnglish

Related product manuals