ESAB SR-B 9 - 2 Introduction; Overview

2 INTRODUCTION
0463 697 001
- 8 -
© ESAB AB 2021
2 INTRODUCTION
2.1 Overview
TIG torches SR-B9, SR-B17, SR-B26, SR-B26-HD, SR-B18, SR-B20, SR-B21,
SR-B400 and XCT-B400W are intended for manual TIG welding and available with water or
air cooled versions.
Certain models are available with flex heads for unlimited movement in confined spaces.
Accessories for the product can be found in the "ACCESSORIES" chapter of this
manual.
The TIG torch is supplied with:
• wear parts (except electrodes):
○ Ø 1.6mm (0.063in.) SR-B9
○ Ø 2.4mm (0.094in.) SR-B17
○ Ø 2.4mm (0.094in.) SR-B26
○ Ø 2.4mm (0.094in.) SR-B26-HD
○ Ø 2.4mm (0.094in.) SR-B20
○ Ø 2.4mm (0.094in.) SR-B21
○ Ø 2.4mm (0.094in.) SR-B400
○ Ø 2.4mm (0.094in.) XCT-B400W
• instruction manual