ESAB Warrior Feed 404HD - Introduction; Overview; Equipment

2 INTRODUCTION
0463 341 231
- 10 -
© ESAB AB 2020
2 INTRODUCTION
2.1 Overview
The Warrior 500i CC/CV is a welding power source intended for GMAW welding, as well as
for welding with powder-filled cored wire (FCAW-S), for GTAW welding, for welding with
coated electrodes (SMAW) and arc air gouging.
The power sources are intended for use with the following wire feed units:
• Warrior Feed 304
• Warrior Feed 304w
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.2 Equipment
The power source is delivered with:
• 5 m return cable with ground clamp
• Instruction manual