3
Installation
Your new detector comes with our latest EZ Mag Mount
™
. Simply slide the detector onto the mounting
Mounting Tips:
• Center of windshield between driver and passenger.
• Ensure clear view of road ahead and sky above.
• Avoid windshield wipers and heavily tinted areas.
To mount the detector in your vehicle:
1 Remove backing from EZ Mag Mount.
2
3 Tilt the display end of the detector slightly upward and engage with the mounting bracket.
4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb
wheel to secure.
5 To remove the detector, simply lift the display end of the detector upward. The detector will release
from the mount.
6 To remove mount from windshield, release locking clamp and pull tab on top of EZ Mag Mount.
EZ Mag Mount Care Instructions:
to air dry.
To Next Page
Loading...