23
Radar Menu
User Mode
• Standard
In this mode, you can access and customize
all settings (factory default).
• Simple
In this mode, you can access and customize
Units (English or metric) and display color only.
All other settings are set to the factory defaults.
Scanning Bar
(factory default is on).
Display Color
The display graphics can be changed to blue, green,
red or orange to match the instrument lighting of
your vehicle (factory default is blue).
Alert Ring
on. The Alert Light glows during an alert (factory
default is on).
Speed Display
is displayed.
Speed Mute
Speed Alert
When you exceed the set speed, the background for
your current speed will change to red and a voice
prompt will announce “over speed” (factory default
is 70 mph).
Over Speed Limit
Note: this setting only applies when MAXcam 360c is
connected to a Wi-Fi hotspot.
When the speed limit is exceeded by the set speed,
the background for your current speed will change
to red and a voice prompt will announce “over
speed”. When the speed limit is not available
MAXcam 360c uses your Speed Alert setting
(factory default is Speed Limit).
Frequency Display
Displays the frequency of the currently displayed
AutoMute
Automatically reduces the volume of an alert several
seconds after the beginning of the alert (factory
default is on).
Units
Units for distance and speed (factory default is
English).
Language
Language for voice and text (factory default is
English).
Voice
settings (factory default is on).
Select the Speed Mute speed. For all alerts received
while teaveling below the specified speed, the
MAXcam 360c will sound a simple double-beep
laert (factory defaulut is 20 mph).
To Next Page
Loading...