Document file:
I:\Texte\Doku\MANUALS\CAN\CAN-USB-2\Englisch\CAN-USB2_Hardware_en_16.odt
Date of print: 2019-06-17
Document type
number:
DOC0800
PCB version: CAN-USB/2 Rev. 1.2
Document History
The changes in the document listed below affect changes in the hardware as well as changes in
the description of the facts, only.
Revision Chapter Changes versus previous version Date
1.4
6 Updated chapter “Correctly Wiring Electrically Isolated CAN Networks“
2013-03-067 New Declaration of Conformity
8 Updated chapter “Order Information“
1.5
3. Note to Correctly Wiring Electrically Isolated CAN Networks inserted
2015-05-26
4.4. Chapter “Serial Interface” deleted
6., 7. Chapters revised
8. New chapter “License”
9. Chapter moved and Declaration of Conformity updated
10. Chapter moved and revised
1.6
Safety Instructions revised and Classification of Warning Messages and
Safety instructions inserted
2019-06-17
3. Hardware Installation revised
4. Weight corrected : 140g
5.1 Description of connector type corrected, description of Shied added
5.2 Description of connector type and signal description added
9. EU Declaration of Conformity updated
Technical details are subject to change without further notice.
CAN-USB/2
Hardware Manual • Doc. No.: C.2066.21 / Rev. 1.6
Page 3 of 28
To Next Page
Loading...