To Next PageTo Next Page
Need help?Do you have a question about the ESD CAN-USB/2 and is the answer not in the manual?
Personnel qualifications for installation and commissioning.
EU regulations and EMC standards compliance.
Operation as USB 2.0-CAN Interface, restrictions.
No user-serviceable parts, warranty voiding.
Proper disposal of defective devices.
Description of LED indicators on the CAN-USB/2 module.
General specifications like temperature, humidity, power, weight.
Details on the USB interface and microcontroller used.
Specifications of the CAN interface.
Availability of device drivers and software.
Pinout and signals for the DSUB9 CAN connector.
Pinout and signals for the USB type B socket.
Standards and recommendations for CAN wiring.
Wiring guidelines for light industrial environments using single twisted pair.
Wiring guidelines for heavy industrial environments using double twisted pair.
Guidelines for electrical grounding in CAN networks.
Recommendations for CAN bus lengths based on bit rate.
Examples of recommended CAN cable types.
How to test and ensure proper CAN bus termination.
Testing CAN_GND connection to functional earth.
Identifying short circuits in CAN wiring.
Measuring CAN_H/CAN_L voltages to diagnose transceiver issues.
Testing CAN transceiver resistance for faults.
Contact information for technical support.
List and download information for PDF manuals.
Information on ordering printed copies of manuals.
General| Category | USB Interfaces |
|---|---|
| Channels | 2 |
| USB | USB 2.0 |
| Galvanic Isolation | Yes |
| Operating Temperature | -40°C to +85°C |
| CAN Standard | ISO 11898 |
| Baud Rate | 10 kbit/s - 1 Mbit/s |
| Operating Voltage | 5 V |
| Dimensions | 100 x 70 x 25 mm |
