Sample Management 97
RENAME SAMPLE
001 Untitled Sample
[0-9]/Encoder/Kybd
5. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
Individual samples can be erased from the bank, and newly created
samples in memory can be erased using this function.
1. Activate Sample Management module.
2. Select Erase Sample (3).
3. Select the sample to be erased, then press ENTER.
ERASE SAMPLE
001 Current Sample
Select a Sample
4. If the sample is stereo, select whether you want to erase the left
side, right side, or the entire stereo sample.
ERASE SAMPLE
001 Selected Sample
Side: Stereo
Select L/R/Stereo
5. Decide if you really want to erase the sample. ESI displays a
screen asking if you are sure. If you are sure you want to erase the
sample, press the INC/YES button. If you are unsure or change your
mind, press the DEC/NO button. ESI returns to the Module
Identifier screen.
3. Erase
Sample
To Next Page
Loading...
