Appendix 219
PRESET EFFECT A
Sends:
Main: 15% Sub2: 0%
Sub1: 0% Sub3: 0%
8. Press the Escape key to go back to the main Effects screen. If
you want to adjust the Effect B settings, select Preset Effect B (1) and
adjust just as you did for the “A” effect.
9. Save the bank. The programmed effects setting will be saved along
with the preset.
Master Effects
You might want the effects to be programmed on a global basis in Omni
and Poly modes. You could choose your favorite reverb, for example,
and have it applied to every preset you select
þ To Program the Effects Globally for all Presets:
1. Press the Preset Definition key. The LED illuminates and the
Preset Definition screen appears.
2. Select the Effects submenu (9). The Effects menu will appear.
3. Select Effect A (0).
4. Set the Effect to “Master Effects” using the Data Entry Control or
INC/DEC keys.
5. Press the Escape key, then select Effect B (1).
6. Set the Effect to “Master Effects” using the Data Entry Control or
INC/DEC keys.
7. Press the Master/Global key. The Master/Global menu will
appear.
8. Select Effects (4). The main Effect screen will appear.
9. Select Master Effect A (0). The following screen will appear.
MASTER EFFECT A
Effect:
Warm Hall
10. Press the Right Cursor key. The Effect Parameters screen
appears. Set the effect parameters to your preference.
To Next Page
Loading...
