Appendix 245
Specifications
Number of Voices ........... 64 mono, 32 stereo
Memory .......................... 4 MB standard, 128 MB maximum
Outputs .......................... 4 individual 1/4" unbalanced, polyphonic
6 additional with Turbo Option
Output Level................... -10 dbm nominal, max 6 volts p-p
Output Impedance.......... 1K Ω
Data Encoding ................ Input: 16 bit
Output: 18 bit
Digital I/O (Turbo Opt.) . S/PDIF format, RCA connectors
SCSI ................................ 50 pin connector, advanced links
Sample Rates ................... 44.1 kHz, 22.05 kHz
Frequency Response ....... 20 Hz to 20 kHz at 44.1 kHz sample rate
THD + N......................... Less than 0.05%
THD ............................... Less than 0.03%
Signal/Quiescent Noise ... Better than 100 dB
Stereo Phase.................... Phase Coherent ±1° at 1 kHz
Weight ............................ 10 lbs (4.5 kg)
Dimensions ..................... W - 17.125" (43.5cm),
H - 3.5" (8.9cm),
L - 9.75" (23.7cm)
Power ............................. 100-240 VAC, 50/60 Hz, auto-switching
supply, less than 30 watts consumption
?
Note:
Use only 72-pin, low profile
SIMMs in the ESI (4 MB, 16 MB or 64 MB).
If different size SIMMs are used, the larger
SIMM MUST be installed towards the rear of
the unit (socket B). The smaller SIMM will
be divided in half (you get only half the
memory of the smaller SIMM).
Because there are lethal voltages present
inside the ESI enclosure, additional sample
memory should be installed only by your
E-mu dealer or a qualified technician.
To Next Page
Loading...
