Dynamic Processing 211
! Caution:
If a plug is not inserted into a
submix jack, any zone assigned to that jack
is automatically re-routed to the main
outputs.
þ To Assign Zones to Assignment Groups:
1. Press the Dynamic Processing key.
2. Select Channel Assignment (9), The following screen appears.
CHANNEL ASSIGNMENT
AssignGroup:Poly All
Submix: main
3. Move the cursor down to the third line and select an Assignment
Group.
4. Move the cursor down to the last line and select a submix.
5. Press ENTER to exit the submodule. The ESI returns to the Module
Identifier.
To Next Page
Loading...
