32 ESI Operation Manual
Tuning the ESI to Other Instruments
Select the Master/Globals module. Choose sub-module Master Tune (1).
This function demonstrates how ESI uses the Data Entry Control to
adjust a parameter. Play the keyboard while adjusting the Data Entry
Control to change the overall tuning.
Transposing the Keyboard
Refer to the Transpose button. While holding the transpose button, play
a key on the keyboard in the lower two octaves. The second C from the
bottom (C2) corresponds to normal or no transposition. All transposi-
tions are based from this C2 key. For example, pressing the G key above
C2 will transpose the keyboard up a perfect fifth. If the keyboard has
been transposed, the transpose LED will stay lit. Press and hold the
transpose button while pressing C2 to return to normal transposition.
To Next Page
Loading...
