Esko Kongsberg X Series User Manual

12
Kongsberg X-series
2.
Cover unused table area to increase Vacuum Hold Down Level.
3.
Use Wash-Out functions instead of creating small waste parts.
Using other tools in combination with the MultiCUT-HP
It might be necessary to reduce the acceleration in order to achieve an optimal Cutting Quality when
combining a heavy tool head with high quality cutting tools.
12.8.7. Cleaner Device
Cleaning the suction house is simple using a Cleaner Device, which is available as an option.
12.8.8. Bits and Bit Change
How to insert / replace a milling bit
1
Ensure the Spindle is not running - the lamp is
dark.
Mind the sharp bit, and move the Suction
House up.
104

Esko Kongsberg X Series Specifications

General

Brand	Esko
Model	Kongsberg X Series
Category	Plotter
Language	English