6
Kongsberg X-series
The Air Pressure should be adjusted to minimum 6 bar (6 kg/cm2, 6*105 Pa).
Recommended pressure level is 7 bar (7 kg/cm2, 7*105 Pa).
Where to find Air Pressure Regulator
6.6. Application programs available
After installation of iPC, the following application programs are available
iPC
Control program for the Cutting Table.
For more information, see User Manual for i-cut Production Console.
SysLoad
Program for download of updates to CU–modules.
HWT800
Hardware test program, see separate HWT800 User Manual.
37
To Next Page
Loading...
Need help?
General
