26
Automatic display darkening setting
DPaOFF>***
Use this to set the display to darken automatically.
o By default, the setting is ON.
o If the OEL display is left on with the same indication for a long
time, brightness irregularities can occur. For this reason, we rec-
ommend that you set the automatic display darkening function
to ON.
ON
If no operation is conducted for ten minutes, the display automati-
cally turns off.
OFF
The display will not turn off automatically.
o If no operation is conducted for ten minutes, the display will
dim to DIMMER1 brightness to protect it from excessive wear.
Automatic power saving setting
APS>***
If there is no input from the selected input source for the set time, the
unit will enter standby mode automatically.
o By default, the setting is OFF.
o The input sources that are not selected have no effect on auto-
matic power saving.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
MENU 1 (continued)