18
Note:
If you forgot your admin password, long press the reset button on the camera for 5 seconds to
restore the password into factory default value 123456. All settings will be restored to factory
default. And you need to configure your camera again.
Note:
1. Change password in system information page accordingly.
2. If you forget the Device Security Code, long press the reset button for 5 seconds to reset
the system to factory default. All settings will be restored to factory default. Needing to
reconfigure your camera.
BASIC SETTINGS
Admin Password
The Admin Password is a specific security code for the administrator to change the advanced
settings. The default admin password is 123456.
Use this function to change the default admin password into your personal admin password.
For the protection of your system configuration, every time you change the advanced settings,
needing to enter the admin password. Please change the admin password periodically.
Device Security Code
The Device Security Code is a specific security code to access the camera.
The default password of the camera is 123456. Please use this function to change the default
password into your personal security code.
1. Type in the old password.
2. Type in the new password and confirm the new password again.
3. Tap OK to save the setting.
Time Setup
The drop-down list shows the world time zone. Select the time zone that will work the best for you.
If your date/time is during the daylight saving time period, please check the Daylight Saving box to
adjust the system time properly.
GUARDCAMDECO Manual.indd 18 12/03/2018 14:23:54
To Next Page
Loading...
