Speed Shift Lever
The speed shift lever has 8 positions: 6 forward
speeds and 2 reverse. To change speeds, move
the speed shift lever to the desired position. The
lever locks in a notch at each speed selection.
Always release the drive clutch lever
before changing speeds. Failure to do so
will result in damage to the snow thrower.
Slower speeds are for heavier snow and faster
speeds are for light snow and transporting the
snow thrower. It is recommended that you sue a
slower speed until you are familiar with the
operation of the snow thrower.
If the engine slows down under a load or
the wheels slip, shift the machine into a
lower gear.
If the front of the machine rides up, shift the
machine into a lower gear. If the front
continues to ride up, lift up on the handles.
4-Way Chute Directional Control
Hold the trigger cap down to us the joystick to
move the discharge chute and the chute deflector.
Release the trigger cap to lock the discharge
chute and chute deflector into position.
To change the chute position, hold the trigger cap
down on the joystick and pivot the joystick to the
right or to the left.
To change the angle/distance which snow is
thrown, hold the trigger cap down on the joystick
and pivot the joy-stick forward or backward.
Drive Clutch Lever
Squeeze the clutch lever against the
handgrip to engage the wheel drive.
Release to disengage.
Always release the drive clutch lever
before changing speeds. Failure to do so
will result in damage to the snow thrower.
Auger Clutch Lever
Squeeze the clutch lever against the
handgrip to engage the auger and
start snow throwing action. Release
to disengage.
When both auger clutch lever and drive clutch
lever are engaged, the auger clutch lever will lock
the drive clutch lever in the engaged position.
This allows you to release your right hand from
the handle and adjust the discharge chute
direction without interrupting the snow throwing
process.
Scraper Blade & Skid Shoes
The scraper blade allows better contact with the
surface being cleared. It also prevents damage to
the housing from normal use.
To Next Page
Loading...