Espressif ESP32 - Software Installation

2. Getting Started
2. Getting Started
2.1.
Getting Started to Use SDK
2.1.1.
Process Overview
2.1.2.
Building Toolchain
We suggest to choose Crosstool-ng as the compiler toolchain. Follow the instructions below to
install Crosstool-ng.
1.
Update the system.
sudo apt-get update
Figure 2-1. Process Overview
Start
Building
firmware
End
Uploading
firmware
Building
toolchain
Configuring
firmware
Note：
Your PC needs to connect to the Internet.
Espressif
2015.12
Confidential