7-1 General description of boards
This product is composed mainly with the peripheral boards such as the boards and the various
types of sensors etc. as shown below.
Main functions of each board are described below.
: Control of CMOS camera, control of LCD, control of Motor,
Control of LED, control of each sensor, control of external
communication, image processing, calculation of
measurement value
: Detection and control of switch operation
: Printing, control of paper feeding
: Power generation for LCD and operation switch board
: Retention of optical setting information and system setting
information
: Detection of limit position of each motor
: Light source for ranging
: Light source for target
Kerato/ Illumination board
: Light source for Kerato and illumination
To Next Page
Loading...
