To Next Page
J
Jesse RichardAug 4, 2025
What to do if my Etac Molift Nomad Medical Equipment lifter does not work?
- AAnne PerezAug 4, 2025
If your Etac Medical Equipment lifter isn't working, there could be several reasons. First, ensure the battery is charged. If the emergency stop is activated, turn it clockwise to reset. Check and reconnect the hand control cable if it's disconnected. Make sure the lifting belt is tight, and raise the lifter if necessary. If none of these steps work, the hand control or control electronics may be defective.
General
