To Next PageTo Next Page
Need help?Do you have a question about the ETC Series 2 Lustr and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| IP Rating | IP20 |
| Beam Angle | 5°-50° (variable) |
| Control Protocol | DMX, RDM, sACN |
| Colors | Red, Green, Blue, Amber, Lime |
| Input Voltage | 100-240VAC 50/60Hz |
| Fixture Type | Ellipsoidal |
| CRI | 90+ |
| Dimming | 0-100% |
| Color Mixing | 7-color system (Lime, Red, Green, Blue, Indigo, Deep Red, Cool White) |
| Power Consumption | up to 300W |
Information on quick setups for console or standalone operation.
Identification and description of the physical parts of the fixture.
Crucial safety warnings and precautions for using the fixture.
Technical specs, physical parts, and basic assembly of the fixture.
Steps for installing lens tubes, adjusting aims, focus, and yoke position.
Covers installation clearances, cooling, safety cable, weight, and cabling requirements.
Details on DMX addressing, profiles, channel assignments, and mapping.
General overview of the fixture's LCD and keypad interface.
How to navigate menus, understand status screens, and use keypad functions.
General principles and methods for navigating through the fixture's menus.
Understanding home screens and navigating the main menu.
Configuring DMX addresses, profiles, LED output, curve, and other parameters.
Managing and activating presets, sequences, and quick color options.
Using diagnostic tools, recalibration, and routine maintenance procedures.
Basic setup steps including installation, cabling, DMX addressing, and quick color.
Using pre-programmed combinations of operational settings for quick setup.
Visual guides for navigating various menu structures of the fixture.
