Why is there a slight smell when I use my ETNA KI290ZT for the first time?
If you notice a slight smell when using your ETNA Hob for the first few times, it's because the new appliance is heating up. This is normal and will disappear after it has been used a few times. Make sure to ventilate the kitchen.
Why does the display light up when the ETNA KI290ZT is activated for the first time?
Normal operation.
What to do if my ETNA KI290ZT Hob is not working and the display is blank?
If your ETNA hob isn't working and the display is blank, it could be due to a power supply issue. Check the fuses or the electric switch to ensure a proper connection.
Why does the fuse blow as soon as I switch on my ETNA KI290ZT?
If a fuse blows immediately when you switch on your ETNA hob, the hob might be wrongly connected. You should check the electrical connections.
What does error code E3/E4 mean on my ETNA KI290ZT and how to fix it?
Error code E3/E4 on your ETNA hob indicates that the supply voltage or frequency differs from the rated values. Turn off the hob and let it cool down until the 'H' disappears from the displays. Then, switch the hob back on. If the error persists, contact an authorised service agent.
What does error code E5 mean on my ETNA Hob and how can I resolve it?
Error code E5 on your ETNA hob means the internal temperature of the hob is too high. Turn off the hob and allow it to cool down until the 'H' disappears from the displays. Then, switch the hob back on. If the same error is displayed again, call an authorised service agent.
General| Type | Gas hob |
|---|---|
| Colour | Stainless steel |
| Number of cooking zones | 4 |
| Material | Stainless steel |
| Ignition type | Electric |
| Weight | 8.5 kg |
| Gas type | Natural gas |
| Dimensions (WxDxH) | 580 x 510 x 40 mm |
To Next Page
