PREFACE
Thank you for purchasing products from EASTERNTOOLS & EQUIPMENT, INC. We
appreciate your business. The following manual is only a guide to assist you and is not a
complete or comprehensive manual of all aspects of maintaining and repairing your welder
and generator. The equipment you have purchased is a complex piece of machinery. We
recommend that that you consult with a dealer if you have doubts or concerns as to your
experience or ability to properly maintain or repair your equipment. You will save time and
the inconvenience of having to go back to the store if you choose to write or call us
concerning missing parts, service questions, operating advice, and/or assembly questions.
Our air-cooled diesel welders and generators have some of the following features:
．Lightweight construction
．Air cooled
．Four-stroke diesel internal combustion engine
．Direct fuel injection system
．Recoil starter or an optional electric starter
．Large fuel tank
．NFB circuit protector
．AC and DC outputs
．Low oil pressure sensor
The ETQ air-cooled diesel welder and generator set are widely used when electrical power
is scarce. Our welders provide a portable mobile solution in supplying power and fabrication
needs for field operations during project construction. Some other known applications
include pipeline construction and metal welding when electrical power is not available.
This manual will explain how to operate and service your welder and generator set.
If you have any questions or suggestions about this manual, please contact your local
dealer or us directly. Consumers should notice that this manual might differ slightly
from the actual product as more improvements are made to our products. Some of
the pictures in this manual may differ slightly from the actual product as well.
Eastern Tools and Equipment, Inc. reserves the right to make changes at any time
without notice and without incurring any obligation.
To Next Page
Loading...
