ETQ DWG6LE - Technical Specifications and Data; 1-1 Technical Specifications and Data

EASTERN TOOLS & EQUIPMENT INC Tele: (888)908-6200 Web Site: easterntools.com
1
CHAPTER 1.TECHNICAL SPECIFICATIONS AND DATA
1-1 Technical specifications and data
DWG6LE
Electric welding generator
Generator
technical
data(AC)
Frequency 60 Hz
Rated power 2.5 kW
AC Voltage 120/240 V
AC Current 20.8/10.4 A
Phase type Single-phase
Power factor (cosΦ) 1.0
Electric
welding
technical
data
(DC)
Electric welding voltage in idle(DC) 65～75 V
Rated current for electric
welding(DC)
180 A
Working voltage for electric
welding(DC)
25～32 A
Electric welding load lasting rate
50%
Current range of electric welding
80～200 A
Speed 3600 rpm
Excitation Governable excitation
Continuous operation time (Hr. by half load) Continuous run for 12 hours
Frame type Open frame steel handcart
Dry weight 123 kg / 272 lbs
Dimensions (LxWxH) 800x620x700 mm/31.5x24.4x28.3 in
Diesel Engine
Engine model ETQ186FA
Output
Continuous 6.7 kW / 9 HP
Maximum 7.45 kW / 10 HP
Bore×Stroke 86×72 mm / 3.39×2.83 in
Displacement 418 cc / 25.51 cu in
Lube-oil capacity 1.65 L / 55.79 fl oz
Fuel tank capacity 11.5 L / 3.04 gal
Lubricating system Pressure splash, duplex type lubrication
Starting system Recoil manual start / Electric start
Cooling system Forced air cooling by flywheel fan