Legend 548 Assembly and User Manual - 47
30068-02A
Parameter Function Default
P 1 Bed Address (1-99) [Set to 255 to restore factory defaults of all parameters] 1
P 5 Session Count (adjustable)
P 6 Lamp Hours (adjustable)
P 7 Bed Hours
P 8 Manual Sessions (counts sessions in “stand-alone” mode)
P 9 Clean Bed Indicator - 0 = off, 1 = on 1
P 10 Manual Lockout (disable stand-alone mode) - 0 = off, 1 = on 0
P 13 After Session Cool-down (minutes) - 3 minimum - 10 maximum 5
P 15 Master Session Count (not adjustable)
P 16 Max. Volume - 0 min. - 9 max. 9
P 17 Allow User to Decrease Time - 0 = off, 1 = on 0
P 18 Default Volume (during idle) - 0 min. - 5 max. 1
P 19 Enable Remote Function with Control Relay - 0 = off, 1 = on 0
P 21 Pause Countdown - 0 = off, 1 = on 0
P 23 Auto Restart (session resumes after momentary power outage) - 0=off, 1=on 0
P 30
Audio Source at Idle (0=SALN, 1=MP3A, 2=ZEN, 3=FM, 5=MP3B, 6=DMX)
2
P 31
Enable SALN (speaker level input on back of bed) - 0 = off, 1 = on
1
P 32 Enable MP3A (user input) - 0 = off, 1 = on 1
P 33 Enable ZEN (soft music) - 0 = off, 1 = on 1
P 34 Enable FM - 0 = off, 1 = on 1
P 36 Enable MP3B (on Python if equipped) - 0 = off, 1 = on 1
P 37 Enable DMX Input - 0 = off, 1 = on 1
P 38 LED Mode - 0=off, 1=fade1, 2=fade2, 3=fade3, 4=blue, 5=red, 6=green 1
P 40 Default Session Volume (during session) - 1 min. - 9 max. 5
P 52 End of Session Beep - 0 = off, 1 = on 1
P 81 FM Preset 1 (example - set to 923 for radio station FM 92.3) 881
P 82 FM Preset 2 (example - set to 923 for radio station FM 92.3) 881
P 83 FM Preset 3 (example - set to 923 for radio station FM 92.3) 881
P 84 FM Preset 4 (example - set to 923 for radio station FM 92.3) 881
P 85 FM Preset 5 (example - set to 923 for radio station FM 92.3) 881
To Next Page
Loading...
