Legend 548 Assembly and User Manual - 7
30068-02A
Disassembly
Your new tanning bed arrives completely
assembled. The reason for this is to assure
everything has been tested at the factory.
Therefore you must fi rst disassemble the bed
before moving it into the salon room.
To avoid possible assembly issues, if you
fi nd you can move the unit without further
disassembly, feel free to do so and begin the
assembly process at a suitable step.
Remember to save all hardware removed. It
will all be used during reassembly.
First, remove the shipping pins locking the
canopy down and raise the canopy. Press-
ing the canopy down slightly will loosen the
pins so they can be removed easily.
Shipping Pin
To Next Page
Loading...
