Eubank EAA1036 - Figure 3. Enthalpy Sensor Temperature Control Points; Figure 4. Electrical Controls, HVESA Alternate Construction

Eubank EAA/EGA Wall Mount AC Installation & Operation Manual
03/2021 Rev.5
19
Brand of Sensor Selection (W3 jumper)
Honeywell enthalpy and dry bulb sensors are currently the only brand of sensors used in the air conditioners.
Jumper W3 allows us to use alternative brands at a future date. On all current air conditioners, pins 1
& 2 are jumpered on W3. See item 4 in Figure 4.
Figure 3. Enthalpy Sensor Temperature Control Points
Eubank Economizer Controller
Figure 4. Electrical Controls, EAA Alternate Construction