Eubank EAA1036 User Manual

40
Eubank EAA/EGA Wall Mount AC Installation & Operation Manual
03/2021 Rev.5
CommStat Touch Lead /Lag Controller (See Figure 9c)
Please refer to the Product Data sheet for the Commstat Touch controller for complete instructions
on installing and programming this controller.
CommStat 4 Lead /Lag Controller
Please refer to the Product Data sheet for the Commstat 4 controller for complete instructions
on installing and programming this controller.
CommStat 3 Controller (See Figure 9d)
The CommStat 3 Controller is a solid state control package designed to operate a fully or
partially redundant air conditioning system for a telecommunication cabinet or shelter. The
CommStat 3 Controller is factory programmed with standard industry set points to facilitate installation.
If desired, each of the set points can be quickly and easily changed in the eld by the installer. It can
be used with Eubank's unique vertical packaged wall mount air conditioners or other environmental
control units. See CommStat 3 Product Data Sheet for installation and programming instructions.
Figure 13a. Humidistat Wiring to a Eubank Air Conditioner with Reheat.
Figure 13b. Thermostat Connection Diagram

Eubank EAA1036 Specifications

General

Brand	Eubank
Model	EAA1036
Category	Air Conditioner
Language	English