EUCHNER EKS - Changing the virtual COM port and driver version information under Windows

Manual EKS Electronic-Key Adapter USB
Page 32/44 Subject to technical modifications 094485-04-11/13
7.3 Changing the virtual COM port and driver version information under
Windows
®
Information!
To be able to change a COM port number, you must be logged on as an administrator.
Information!
This is possible only if an Electronic
-Key adapter is inserted.
Under Windows
®
7:
 Start the process by launching the
Device Manager via Windows Start… and
entering the following in the Search programs and
files box: devmgmt.msc
 Click on devmgmt.msc
Under Windows
®
XP:
 Start the process by launching the
Device Manager via Windows Start/Run… and
entering the following in the Open box:
devmgmt.msc
 Click on OK
 Find the following entry in the Ports (COM & LPT)
list: EUCHNER Electronic-Key-System USB
(COM#).
 Right-click on the entry and select Properties