● Carefully unwind and pull off any hair or string that is wrapped between the main unit
and the side brushes.
● Use a cloth dampened with warm water to remove dust from the brushes or to gently
reshape them.
Use the side brushes only when they are completely dry.
Replace the Side Brushes
The side brushes may become bent or damaged after being used for a period of time. Follow
the instructions below to replace them.
1. Use a Phillips screwdriver to unscrew the screws on the side brushes.
2. Pull off the old side brushes and snap the new ones into place.
3. Screw down the screws to fasten the side brushes.
4. Troubleshooting
To Next Page
Loading...
