EUFY RoboVac 11c+ - Specifications; Product Specifications

Solid blue
RoboVac has connected
to your router, but cannot
access the Internet.
● Check if your router is
connected to the Internet.
● Check with your Internet
provider to see if there is any
Internet connection problem.
Rapidly flashing blue
RoboVac cannot connect
to your wireless router.
● Check if you have modified
your network name and
password.
● Reset Wi-Fi connection if
necessary. Refer to this
section “Use Your RoboVac
with EufyHome App > Reset
Wi-Fi connection”.
Slowly flashing blue
Wi-Fi connection is reset
or has not been set up
before.
● Set up Wi-Fi connection with
RoboVac. Refer to this section
“Use Your RoboVac with the
EufyHome App”.
● Reset Wi-Fi connection if
necessary. Refer to the section
“Use Your RoboVac with the
EufyHome App > Reset Wi-Fi
connection”.
Off
● RoboVac is turned
off.
● RoboVac’s power
level is low.
● RoboVac is in
Sleep Mode.
● Charge RoboVac by attaching
it to the charging base. Make
sure the main power switch on
the side of RoboVac is turned
on.
5. Specifications
Product Model
T2107
Input
19 V == 0.6 A
Battery Voltage
DC 14.4 V
Power Consumption
30 W