5. Start Edge cleaning
6. Start Single Room cleaning
- Install 2 AAA batteries before using the remote control for the first time. Make sure the positive and
negative ends are facing the correct polarity direction as marked in the battery compartment.
2. Using Your RoboVac
Important Tips Before Use
● Remove power cords and small objects from the floor that may entangle RoboVac.
● Remove rugs that are thicker than 0.87 in/22 mm as RoboVac may get trapped. Fold
tasseled edges of area rugs underneath to prevent tangling RoboVac. Do not use
RoboVac on high-pile carpeting.
● Avoid cleaning spaces lower than 3.9 in/100 mm to prevent RoboVac from getting stuck.
To Next Page
Loading...
