COLOR GRADING MEDIA CONTROLLER
USER GUIDEEuControl
34
Update Firmware
Each time a new version of EuControl is installed, each MC Color, MC Transport,
MC Control, and MC Mix in your system may need its firmware updated. The
firmware is embedded in EuControl so an Internet connection is not required.
Select each Artist media controller in the My Surfaces list (shift-click to select
multiple devices). Press Update Firmware to update their firmware. If a dialog
displays a message that the firmware is up to date, no further action is neces-
sary.
Follow the instructions in the EuControl dialog box.
• The Artist media controllers must be plugged into a working power source.
• Do not power off any Artist media controllers during the update or attempt
to interrupt the update.
• The status for each Artist media controller being updated is displayed on
that device as well as in the EuControl dialog box.
Show Info
Select an Artist media controller and click Show Info to display the name and hard-
ware/software information on MC Color’s display and in a dialog on the Mac.