How to fix low pan water level in EVAPCO Cooling boxes?
If you have low pan water level in your EVAPCO Cooling boxes, it could be due to the Electronic Water Level Control Float Ball not being set correctly; refer to the EWLC Section. You can also adjust the float ball up or down to achieve the proper water level. Note that the float ball is set to the operating level at the factory.
General| Brand | EVAPCO |
|---|---|
| Model | ATC-E |
| Category | Accessories |
| Language | English |
Essential safety guidelines for operating and maintaining the equipment, including lockout procedures.
Routine maintenance tasks and their recommended frequencies for optimal unit performance.
Guidelines and considerations for operating units in freezing temperatures to prevent damage.
Managing biological risks like Legionella in water systems.
Methods to prevent freezing of heat exchanger coils in closed circuit coolers.
Techniques for managing unit capacity in cold ambient conditions, including VFDs and two-speed motors.
Strategies for controlling and minimizing ice formation during cold weather operation.
Addresses fan motor over-current issues, unusual noise, and blade rubbing.
Diagnoses issues like pump over-amping, makeup valve malfunction, and overflow.
Troubleshoots basin overflowing, low pan levels, and overflow connection problems.
Steps for diagnosing and resolving issues with electric water level control systems.
To Next Page
