Evco S.p.A. EVF815 | Installer manual ver. 1.1 | Code 144F815E114
page 39 of 58
(13) if the door is opened during defrosting or evaporator fan standstill, opening has no effect on the compressor
(14) modify the parameter during the "stand-by" status to prevent damage to the utility
(15) if parameter u2 is set at 0, device switch-off will cause the cabinet light to switch off and on successive switch
on the cabinet light will remain off. If parameter u2 is set at 1, device switch-off will not cause the cabinet light
to switch off and on successive switch-on the cabinet light stays on.
To Next Page
Loading...
