EVCO S.p.A.
EV3 MVC & EVD MVC | Application manual ver. 1.0 | Code 144EV3MVI104
page 16 of 72
- it flashes rapidly if the external air limitation function is activated
- otherwise it is OFF
Fan speed LED
It shows the speed at which the fans are operating
LED for the unit of measurement of the value shown on the upper display when the
probe is configured for temperature and the unit of measurement is °C (C59)
LED for the unit of measurement of the value shown on the upper display when the
probe is configured as a humidity sensor (not used)
LED for the unit of measurement of the value shown on the upper display when the unit
of measurement is a percentage (not used)
LED for the unit of measurement of the value shown on the upper display when the
probe is configured for pressure (not used)
LED for the unit of measurement of the value shown on the upper display when the
probe is configured for temperature and the unit of measurement is °F (C59)
LED for the unit of measurement of the value shown on the lower display when the
probe is configured for temperature and the unit of measurement is °C (C59)
LED for the unit of measurement of the value shown on the lower display when the
probe is configured as a humidity sensor
LED for the unit of measurement of the value shown on the lower display when the unit
of measurement is a percentage
LED for the unit of measurement of the value shown on the lower display when the
probe is configured for pressure (not used)
LED for the unit of measurement of the value shown on the lower display when the
probe is configured for temperature and the unit of measurement is °F (C59)
Dehumidifier LED
- ON if dehumidifying is required
- it flashes slowly if the dehumidifying is required
- otherwise it is OFF
Heat regulation LED
- ON if heat regulation or post-heating is required
- otherwise it is OFF
Timer setting LED
- ON if timer-setting regulation is activated
- OFF for manual regulation
Manual mode LED
- ON if manual mode regulation is activated
- OFF if timer-setting regulation is activated
Comfort LED
- ON if comfort timer-setting regulation is used
- otherwise it is OFF
Economy mode LED
- ON if economy timer-setting regulation is used
- otherwise it is OFF
Night-time LED
- ON if night-time timer-setting regulation is used
- otherwise it is OFF